A novel route to Pt-Bi2O3 composite thin films and their application in photo-reduction of water

A novel homoleptic bismuth(III) β-diketonate (dibenzoylmethane – dbm) complex [Bi(dbm)3]2 has been used as a precursor to thin films of crystalline β-Bi2O3, and hexachloroplatinic acid (H2PtCl6·6H2O) has been demonstrated as a suitable precursor for deposition of platinum nanoparticles, both deposited via aerosol-assisted chemical vapour deposition (AACVD). Thin films of Pt–Bi2O3 were co-deposited from a mixture of [Bi(dbm)3]2 and H2PtCl6·6H2O; the introduction of Pt particles into β-Bi2O3 causes hydrogen to be evolved during photolysis of water over the composite material, a property not found for Pt particles or β-Bi2O3 alone

Generation of internal stress and its effects

Internal stresses may be generated continually in many polycrystalline materials. Their existence is manifested by changes in crystal defect concentration and arrangement, by surface observations, by macroscopic shape changes and particularly by alteration of mechanical properties when external stresses are simultaneously imposed

Quantifying Implications of Deposit Aging from Crude Refinery Preheat Train Data

Heat exchanger fouling has been studied for some time in the petroleum industry. As understanding of fouling dynamics and mitigation methods improves, refinery fouling mitigation strategies are changing. The implications of deposit aging in refinery units have not been addressed in detail: aging refers to where the deposit undergoes physical and chemical conversion over time. In the 2009 Heat Exchanger Fouling and Cleaning conference, Wilson et al. [Ageing: Looking back and looking forward] presented a simple framework illustrating how deposit aging impacts heat exchanger thermal and hydraulic performance. This paper presents insights into deposit aging gained from analysis of refinery monitoring data. Two case studies are presented: (i) one from the Preem refinery in Sweden where stream temperature, flow and gauge pressure measurements indicated a higher deposit thermal conductivity in exchangers located in the hotter section of the preheat train. (ii) US refinery stream temperature, flow and plant cleaning log data, showing an increased resistance to cleaning when deposits are exposed to high temperature for a prolonged period. The use of deposit aging analysis to improve exchanger operation is discussed.I am a co-author on this paper. The work reported was undertaken for a Swedish company by another company, HTRI.I advised on the results

Effect of the cation structure on the properties of homobaric imidazolium ionic liquids

In this work we investigate the structure–property relationships in a series of alkylimidazolium ionic liquids with almost identical molecular weight. Using a combination of theoretical calculations and experimental measurements, we have shown that re-arranging the alkyl side chain or adding functional groups results in quite distinct features in the resultant ILs. The synthesised ILs, although structurally very similar, cover a wide spectrum of properties ranging from highly fluid, glass forming liquids to high melting point crystalline salts. Theoretical ab initio calculations provide insight on minimum energy orientations for the cations, which then are compared to experimental X-ray crystallography measurements to extract information on hydrogen bonding and to verify our understanding of the studied structures. Molecular dynamics simulations of the simplest (core) ionic liquids are used in order to help us interpret our experimental results and understand better why methylation of C2 position of the imidazolium ring results in ILs with such different properties compared to their non-methylated analogues

Retrofitting Crude Oil Refinery Heat Exchanger Networks to Minimise Fouling While Maximising Heat Recovery

The use of fouling factors in heat exchanger design and the lack of appreciation of fouling in traditional pinch approach has often resulted badly designed crude preheat networks that are expensive to maintain. The development of thermal and pressure drop models for crude oil fouling has allowed its effects to be quantified, so that techno-economic analyses can be performed and various design options compared. Application of these fouling models is carried out on two levels: on the assessment of adding extra area to individual exchangers, and the design of a complete network using the Modified Temperature Field Plot. Application to a refinery case study showed that both at the exchanger and network levels, designing for maximum heat recovery using traditional pinch approach results in the least efficient heat recovery over a time period when fouling occurs

An Efficient Algorithm for Optimizing Adaptive Quantum Metrology Processes

Quantum-enhanced metrology infers an unknown quantity with accuracy beyond the standard quantum limit (SQL). Feedback-based metrological techniques are promising for beating the SQL but devising the feedback procedures is difficult and inefficient. Here we introduce an efficient self-learning swarm-intelligence algorithm for devising feedback-based quantum metrological procedures. Our algorithm can be trained with simulated or real-world trials and accommodates experimental imperfections, losses, and decoherence